HDPE Geocell

G3 Geocell Adjustable Series is designed to provide more flexibility insection size than regular GeoGrid Section and cell size will change aseach section is expanded to the required dimension.Section length can be increased or decreased by adding or subtracting cells at no additional charge.

G 3 450
G3 Standard section are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide. Each strip is the appropriate width and 142 inches (3.6 m) in length. Weld spacing is 18 in .12 in (450  3 mm). Cell density is 22 cells per meter squared. Cell walls are smooth and if perforations are required approximately 11% 1: 2% of the cell wall is removed.

G 3 650
G3 Standard section are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide.Each strip is the appropriate width and 142 inches (3.6m) in length. Wed spacing is 26.0 in 1 .12 in (650 : 3mm). Cell density is 9 cells per meter squared. Cell walls are smooth and if perforations are required 11% :k 2% of the cell wall is removed.

G 3 350
G3 Standard sections are manufactured from 58 strips of HDPE, resulting in a section length of 29 cells and 10 cells wide. Each strip is the appropriate width and 142 inches (3.6m) in length. Weld spacing is 14.0 in 12 in (355 : 3mm). Cell density is 35 cells per meter squared.Cell walls are textured and if perforations are required 11% 2% of the cell wall is removed.